Sunday, October 20, 2024

Found Soldier Federal #1 - 2024 10 20 Profiles of Courage

2024 10 19 Profiles of Courage - Dwayne Winkler

____________

Saturday, October 19, 2024, 6:00 am MST, we are drilling at 7,045’ TD. We made 823‘ averaging 34 fph (10 fph min, 80 fph max). Prates were lower than yesterday due it being necessary to adjust directional drilling parameters to maintain the desired angle and direction. It is in this geological section of the hole that the formations have a strong tendency to cause the bit to drift in a Southeast direction. The desired trajectory is to the Northwest.

 

Today’s video will focus on Mr. Duane Winkler, our nighttime Wellsite Supervisor and Ben Hadden’s counterpart. Duane is highly trained and very good at what he does with decades of experience, both domestic and international. He is responsible for all wellsite operations and the success thereof. His daily routine involves a considerable amount of time communicating with rig personnel and service company representatives to assure optimal drilling operations, efficiencies, and cost control.

 

Enjoy!!

 

2024 10 19   https://vimeo.com/1021068924/1704613912?share=copy 

2024 10 19 Profiles of Courage - Dwayne Winkler


_______________________

Hello Everyone!

 

Please find below a link to today’s video. It shows the Driller and Rig 88 hands making up the directional drilling tools at the bottom of the drill string.

Everyone must be very careful working on the floor during this time to prevent getting a hand or fingers caught in between some of the big iron shown in the video!

Please note that the opening screen in the video was inadvertently left blank.

It should read:

 

2024 10 15 Rig 88 Update

                 Bit Trip!

       October 15, 2024

 

The video is being revised as we speak and will be ready shortly.

In the meantime, here is the original video.

 

https://vimeo.com/1019986411/e603bf29af?share=copy

 

Enjoy!! 

_______________ Oh yeah Good one 10-15-2024
Video - 2024 10 12 BOP Nipple Up and Testing

No comments:

Post a Comment